Table of Contents
Advertisement
DAILY USE
WARNING! Refer to Safety chapters.
LOADING THE LAUNDRY
Open the water tap. Connect the mains plug to the
mains socket.
1. Pull the door handle to open the appliance
door.
2. Put the laundry in the drum, one item at a time.
3. Shake the items before you put them in the
appliance.
Make sure not to put too much laundry in the drum.
Refer to max. loads indicated in "Programme chart".
4. Close the door.
CAUTION! Make sure that no laundry
stays between the seal and the door.
There is a risk of water leakage or
damage to the laundry.
Washing heavily oiled, greasy stains
could cause damage rubber parts of
the washing machine.
USING DETERGENT AND ADDITIVES
DETERGENT COMPARTMENTS
Detergent compartment for
washing phase.
If you use liquid detergent, put it
immediately before you start the
programme.
12
1. Measure out the de-
tergent and the fabric
conditioner.
2. Put the detergent
and the fabric condi-
tioner into the com-
partments.
3. Carefully close the
detergent drawer.
Compartment for liquid additives
(fabric conditioner, starch).
Flap for powder or liquid deter-
gent.
LIQUID OR POWDER DETERGENT
A
B
When you use the liquid detergent:
•
Do not use gelatinous or thick liq-
uid detergents.
•
Do not put more liquid then 120
ml.
•
Do not set the delay start.
CAUTION! Do not
exceed the MAX
level.
The default position of
the flap is A (powder de-
tergent).
To use liquid detergent:
1. Remove the drawer.
Push the drawer edge in
the place with the arrow
(PUSH) to remove the
drawer easily.
2. Adjust the flap in posi-
tion B.
3. Put back the drawer in
the recess.
Advertisement
Table of Contents
