Using The User Defined Keys - Yamaha 006IPTO-F0 Owner's Manual

274
Chapter 20—Other Functions
5 Move the cursor to the OSCILLATOR ON/OFF button, then press the [ENTER]
or [INC]/[DEC] buttons to turn on the Oscillator.
The Oscillator signal is now routed to the channels selected in the ASSIGN section.
6 Move the cursor to the parameter control in the LEVEL section, then rotate
the Parameter wheel to raise the Oscillator level.
You can view the current Oscillator level on the LEVEL meter.
Using the User Defined Keys
USER DEFINED
You can assign any of more than 200 functions to the USER DEFINED KEYS [1]–[12].
KEYS
If you assign to one of the buttons (or "keys") a function that is usually executed on the dis-
DISPLAY
play pages, you can use the assigned button as a shortcut.
The Function to User Defined Keys assignments are stored in banks. (See page 295 for more
information on the initial bank settings.) The DM1000 provides eight banks (Banks A–H).
Switching banks enables you to change the assignment quickly.
Follow the steps below to assign functions to the USER DEFINED KEYS.
1 Press the USER DEFINED KEYS [DISPLAY] button to locate the User Def | User
Def page.
This page contains the following parameters:
A
INITIALIZE
This button resets the contents of all banks to their initial settings.
B
BANK
These buttons select the desired banks.
C
TITILE
This parameter displays the name of the bank selected by the BANK parameter button.
Move the cursor to the TITLE parameter box, then press [ENTER]. The Title Edit win-
dow appears, enabling you to enter a name.
D
1–12
These parameter boxes enable you to assign functions to USER DEFINED KEYS
[1]–[12].
DM1000 Version 2—Owner's Manual
1
3
4
2