User Defined Keys. Programming User Defined Keys - Yamaha M7CL Quick Start Manual

The virtual effects rack. remote ha connection. editor connection guide. using scenes, patching monitor out, accessing outport delays

Hide thumbs Also See for M7CL:

Table of Contents

User defined keys. Programming user defined keys.

There are 12 user defined keys on M7CL. These are programmable shortcut keys; they can replace a screen

press or cause some other action. They come pre-programmed with some examples but can be user defined

from a menu in the SETUP page.

To access the USER SETUP pop-up,

press the [SETUP] button in the

Function Access Area. Then press the

[USER SETUP] button. If this does not

show the USER DEFINED KEYS, use

the tab at the bottom of the pop-up.

To bookmark a particular screen,

choose [PAGE CHANGE] in column 1

and [PAGE BOOKMARK] in column 2.

Scroll up/down with the screen buttons

or use the encoders below the screen.

Push-click to move to the next column.

Now you can go to the screen you wish to access from the user defined key. When on that screen, press and hold

the key for a couple of seconds to program it. Now pressing that key will take you straight to the screen from

any other starting place.

The pop-up shows the action of the pre-

programmed default keys.

To change a key, press on the

screen key to give the USER

DEFINED KEY SETUP pop-up.

19/20

M7CL Quick Start Guide Part 2

Table of Contents