Sound Controls; Selecting Surround Sound; Selecting Digital Sound Effects; Adjusting The Treble/Bass Level - Yamaha CINEMASTATION DVR-C300 Owner's Manual

Dvd home theater sound system
Table of Contents

Advertisement

Sound
Controls
IMPORTANT!
For proper
surround
sound, make sure the
speakers
and subwoofer
are connected
to
this receiver
(see "Connecting
the DVD
receiver
and speakers
to the subwoofer"
on
page 11).
Selecting
surround
sound
Press SURR on the remote control to select:
MULTI-CHANNEL
or STEREO.
•-_ The availability of the various surround
sound
modes depends on the number of speakers used
and the sound available on the disc.
•-_ The center and surround
speakers operate only
in multi-channel
surround
mode.
•-_ The available output
modes for muki-channel
include: Dolby Digital, DTS (Digital Theatre
Systems) Surround and Dolby Pro Logic II.
•_ Stereo broadcasts or recordings produce
some
surround
channel effects when played in a surround
mode. However, mono (single channel sound)
sources do not produce any sound from the
surround
speakers.
Notes:
- The SURR button is not functional for SA-CD
playback.You must access the disc menu in order to
select between multi<hannel and stereo tracks, (see
"Playing Super Audio CDs (SA-CDs)'" on page 2 7).
- The surround sound mode cannot be selected if the
system setup menu is selected,
Selecting
digital
sound
effects
You can select
preset
digital sound effects that
match the content
of your disc, or that optimize
the sound of the musical style you are playing,
Press EFFECT
to select from the available
sound
effects.
When
playing movie discs or while inTV mode, you
can select:
CONCERT,
DRAMA,ACTION
or SCI-FL
When playing music discs or while inTUNER
or
AUX mode, you can select:
ROCK, DIGITAL, CLASSIC or JAZZ.
Notes:
- Digital sound effects and the treble/bass features
cannot be activated at the same time.
- For flat sound output, select CONCERT or CLASSIC,
Adjusting
the
treble/bass
level
TheTREBLE
(high tone) and BASS (low tone)
features enable you to define the sound-processor
settings.
_1 Press TRE or BASS on the remote control.
O Within
five seconds, press VO/(+/-)
to adjust the
treble or bass level (MIN,-2,-1,0,
+1, +2 or MAX).
"_ If the volume control
is not used within five
seconds, it will resume its normal volume control
function.
37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents