Setting Language Preferences; Oniscreen Display (Osd) Language; Audio, Subtitle And Disc Menu Languages - Yamaha CINEMASTATION DVR-C300 Owner's Manual

Getting Started
Setting language preferences
You can select your preferred language settings so
that this receiver will automatically switch to your
preferred language for you whenever you load a
disc. If the language selected is not available on the
disc, the disc's default setting language will be used
instead.The OSD (on-screen display) language for
the system menu will remain as you set it,
regardless of various disc languages.
_]_ In DVD/CD mode, press SET UP,
O Press I_ to select [GENERAL SETUP PAGE].
_]t Press AV to highlight [OSD LANGUAGE], then
press I_.
_]_ Press • twice to stop playback (if any), then press
SET UP.
Press I_ repeatedly to select [PREFERENCE
PAGE].
Press AV to highlight one of the options below at
a time, then press I_.
- [AUDIO] (disc's soundtrack)
- [SUBTITLE] (disc's subtitles)
- [DISC MENU] (disc's menu)
0
Press AW to select a language and press ENTER
(OK) to confirm.
0 Press AV
to select
a language and press ENTER
(OK) to confirm.
If the language you want is not in the list,
then select [OTHERS].
Use the numeric keypad (0-9) on the remote
control to enter the 4-digit language code 'XXXX'
(see "Language Codes" at the end of this manual)
and press ENTER (OK) to confirm.
O Repeat steps O_O for other settings,
TIPS: To return to the previous menu,press 411.
To clear the menu, press SET UP.
20