Disconnect Device; Emergency Power Off; Ozone Information; Maintenance Information - Xerox Phaser 3100MFP/S User Manual

Xerox printer/fax/scanner/copier user guide
Hide thumbs Also See for Phaser 3100MFP/S:
Table of Contents

Advertisement

Phaser 3100MFP/S
3. Always connect equipment to a correctly grounded power outlet. If in doubt, have the outlet checked by a
qualified electrician.

Disconnect device

The power cable is the disconnect device for this equipment. It is attached to the back of the machine as a plug-
in device. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet.

Emergency Power Off

If any of the following conditions occur, turn off the machine immediately and disconnect the power cable(s)
from the electrical outlet(s). Contact an authorized Xerox Service Representative to correct the problem:
• The equipment emits unusual odors or makes unusual noises.
• The power cable is damaged or frayed.
• A wall panel circuit breaker, fuse, or other safety device has been tripped.
• Liquid is spilled into the machine.
• The machine is exposed to water.
• Any part of the machine is damaged.

Ozone Information

This product produces ozone during normal operation. The ozone produced is heavier than air and is dependent
on copy volume. Install the system in a well-ventilated room.
If you need additional information about ozone, please request the Xerox publication Facts About Ozone (part
number 610P64653) by calling 1-800-828-6571 in the United States and Canada. In other markets, please contact
your local Xerox representative.

Maintenance Information

1. Any operator product maintenance procedures will be described in the user documentation supplied with the
product.
2. Do not carry out any maintenance on this product which is not described in the customer documentation.
3.
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when
used on electromechanical equipment.
4. Use supplies and cleaning materials only as directed in the Operator section of this manual.
5. Do not remove covers or guards that are fastened with screws. There are no parts behind these covers that
you can maintain or service.

Consumables Information

1. Store all consumables in accordance with the instructions given on the package or container.
2. Keep all consumables away from the reach of children.
3. Never throw print cartridges into an open flame.
4. Print Cartridges: When handing print cartridges, fusers, etc, avoid skin or eye contact. Eye contact can cause
irritation and inflammation. Do not attempt to disassemble the cartridge. This can increase the risk of skin or
eye contact.

Product Safety Certification

EUROPE: This XEROX product is certified by the following Agency using the Safety Standards listed.
Agency: TUV Rheinland
Standard: IEC 60950-1
- 4 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 3100mfp3100mfpx - phaser b/w laser

Table of Contents