Technical Specification - Buffalo CN219 Instruction Manual

Trouble Shooting
Fault
Does not heat
Mixing paddle does
not turn
Tap leaks
Water escaping
from boiler
Fault
Product leaks from
bottom of bowl
Machine shuts
down while in use
If the machine malfunctions due to causes other than those listed or the proposed corrective
actions do not solve the problem please call a Buffalo agent or qualified technician

Technical Specification

Model Voltage Power
220-240V
CN219 1006W
50/60Hz
Probable Cause
No power
Switch set to OFF
Thermal Protector Switch has
activated
Thermostat set to low
No power
Mixing rod not fitted correctly
Motor Fault
Switch set to OFF
Tap not fitted correctly
Build up of debris
Sealing Gasket needs replacing
Temperature too high
Tank filled above MAX indication line
Sealing gasket needs replacing
Probable Cause
The bowl is not fitted correctly
Sealing gasket needs replacing
The water level in the boiler tank has
fallen below the minimum level
No water in boiler tank
Current
4.37A
Action
Make sure the machine is plugged
in correctly
Set the switch to ON
Reset Thermal Protector Switch
Adjust the thermostat
Make sure the machine is plugged
in correctly
Ensure mixing rod is correctly fitted
Call Buffalo agent or qualified
technician
Set the switch to ON
Empty machine and fit tap as per
instructions
Empty machine and clean tap as per
instructions
Call Buffalo agent or qualified
technician
Adjust the thermostat
Allow machine to cool then empty
the tank and refill to correct level
Call Buffalo agent or qualified
technician
Action
Empty machine and re-fit bowl as
per instructions
Call Buffalo agent or qualified
technician
Fill the boiler tank to max fill level
and reset Thermal Protector Switch
Fill the boiler tank to max fill level
and reset Thermal Protector Switch
Capacity Dimensions
(Litres) h x w x d mm
5
465 x 410 x 280
UK
Weight
(kg)
7.3