NEC ASPILA EX Feature Manual page 373

Programming
Aspila EX Software Manual
•15-07-01 : Programming Function Keys
Extension users may want a function keys programmed for Transfer (code 06).
•20-02-01 : System Options for System Telephones - Retrieve the Line After Transfer
Enable (1) or disable (0) an extension's ability to answer a call after it's been transferred, but
before it's answered.
•20-03-01 : System Options for Single Line Telephones - SLT Call Waiting Answer Mode
For a busy single line telephone, set the mode used to answer a camped-on trunk call:
• 0 = Press and release hookswitch to pick up waiting call
• 1 = Press and release hookswitch and dial Service Code 894 to answer waiting call
•20-03-02 : System Options for Single Line Telephones - MOH or Ringback on Transferred
Calls
24-02-02 : System Options for Transfer - MOH or Ringback on Transferred Calls
Use these options to enable (0) or disable (1) MOH on Transfer. If enabled (0), a transferred
caller hears Music on Hold while their call rings the destination extension. If disabled (1), a
transferred caller hears ringback while their call rings the destination extension. For this
option to work with voice mail, the transferred call must be an unscreened transfer.
•20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to extensions.
•20-11-06 : Class of Service Options (Hold/Transfer Service) - Unscreened Transfer
In an extension's Class of Service, enable (1) or disable (0) the extension's ability to use
Unscreened Transfer.
•20-11-07 : Class of Service Options (Hold/Transfer Service) - Transfer Without Holding
In an extension's Class of Service, enable (1) or disable (0) the extension's ability to use
Transfer Without Holding.
•20-11-08 : Class of Service Options (Hold/Transfer Service) - Transfer Display
In an extension's Class of Service, enable (1) or disable (0) the extension's incoming Transfer
pre-answer display.
•20-11-11 : Class of Service Options (Hold/Transfer Service) - Automatic On Hook Transfer
In an extension's Class of Service, enable (1) or disable (0) the extension's ability to use
Automatic On Hook Transfer. If enabled, user must press HOLD and dial the extension num-
ber to Transfer the call. If disabled, a user must have a Transfer Programmable Function Key.
To transfer the call, the user would press HOLD, dial the extension number, then press the
Tranfer Programmable Function key to complete the transfer.
•20-11-18 : Class of Service Options (Hold/Transfer Service) - No Recall
If an extension should not receive recalls of unanswered Transferred calls, disable this option
(0=allow recalls, 1=prevent recalls).
•24-02-01 : System Options for Transfer - Busy Transfer
Prevent (0) or allow (1) extensions to transfer calls to busy extensions. If disabled, calls trans-
ferred to busy extensions recall immediately.
•24-02-03 : System Options for Transfer - Delayed Call Forwarding Time
If activated at an extension, Delayed Call Forwarding occurs after this interval (0-64800 sec-
onds). This also sets how long a Transferred call waits at an extension forwarded to Voice
Mail before routing to the called extension's mailbox.
•24-02-04 : System Options for Transfer - Transfer Recall Time
Set the Transfer Recall Time (0-64800 seconds). An unanswered transferred call recalls to
the extension that initially transferred it after this interval. This interval also sets how long a
transferred call camps-on to a busy extension.
Transfer
Features 359