Setting Sensor Parameters - Huawei TP48120A-HD15A1 Installation Manual

TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
Main
Menu

10.5 Setting Sensor Parameters

Set sensor parameters based on site requirements.
Table 10-4 Sensor parameter settings
Main
Menu
Parameters
Settings
Issue 03 (2014-12-02)
Second- Third-
Level Level
Menu Menu

If battery routes 1 and 2 are respectively connected to a battery string (each battery string consists of
four 12 V, 100 Ah batteries in series), set Battery1 Connected and Battery2 Connected to Yes and
others to No, and set Rated Capacity to 100 Ah.
 If battery route 1 is connected to two battery strings in parallel (each battery string consists of four
12 V, 100 Ah batteries in series), set Battery1 Connected to Yes and others to No, and set Rated
Capacity to 200 Ah.
Second- Third-
Level Level
Menu Menu
Power Sensor
System Config. Para.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Fourth-Level Default
Menu Value
Battery2 Yes
Connected
Rated Capacity 100 Ah
BLVD Enable Yes
Fourth-Level Menu Default Value Setting
Water Sensor
Smoke Sensor
Ambient Temp.
Sensor
Ambient Humi.
Sensor
10 Commissioning
Setting Value
NOTE
If N battery strings are
connected, set Battery 1
Connected to Battery N
Connected to Yes, and set
the other parameters to
No.
Rated capacity of the
batteries in a battery
string.
NOTE
The batteries connected to
one circuit breaker or fuse
are called a battery string.
Yes, No
None Set to Yes
or No as
None
required.
None
None
68