TP48120A-HD15A1 & TP48120A-HD15A2 &
TP48200A-HD15A1 & TP48200A-HD15A2
Installation Guide
Figure 7-5 Installing a communications cable
(1) RS485/RS232 port on the SMU
----End
7.3 Installing a DC Output Power Cable
Procedure
Step 1 Route the DC output power cable into the cabinet through the hole in the right part of the
cabinet bottom.
Step 2 Secure the negative power cable to the corresponding DC output circuit breaker based on the
actual load capacity.
Step 3 Connect the positive power cable to the corresponding screw on the RTN+ busbar.
Issue 03 (2014-12-02)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
(2) NMS that supports YDN1363 protocol
7 Installing Cables
50