SINUMERIK® Documentation
Printing history
Brief details of this edition and previous editions are listed below.
The status of each edition is indicated by the code in the "Remarks" columns.
Status code in the "Remarks" column:
A .... New documentation.
B .... Unrevised reprint with new Order No.
C .... Revised edition with new status.
If factual changes have been made on the page since the last edition, this is indicated by a new edition
coding in the header on that page.
Edition
Order No.
04.96
6FC5 297-0AB80 – 0BP0
08.97
6FC5 297-0AB80 – 0BP1
04.99
6FC5 297-5AB80 – 0BP0
05.00
6FC5 297-5AB80 – 0BP0
07.02
6FC5 297-6AB80 – 0BP1
11.03
6FC5297-6AB80 – 0BP2
This manual is also included in the documentation on CD-ROM (DOCONCD)
Edition
Order No.
10.03
6FC5 298-6CA00-0BG4
Trademarks
SIMATIC®, SIMATIC HMI®, SIMATIC NET®, SIROTEC®, SINUMERIK® and SIMODRIVE® are registered
trademarks of Siemens AG. Other names in this publication might be trademarks whose use by a third party for
his own purposes may violate the rights of the registered holder.
More information is available on the Internet at:
http://www.ad.siemens.com/sinumerik
This publication was produced with WinWord V8.0 and Designer V7.0
and the documentation tool AutWinDoc.
The reproduction, transmission or use of this document or its contents
is not permitted without express written authority. Offenders will be
liable for damages. All rights, including rights created by patent grant or
registration or a utility model or design, are reserved.
© Siemens AG 2003. All rights reserved.
Order No. 6FC5297-6AB80-0BP2
Printed in the Federal Republic of Germany
Remarks
A
C
C
C
C
C
Remarks
C
Other functions not described in this documentation might be
executable in the control
.
This does not, however, represent an
obligation to supply such functions with a new control or when
servicing.
We have checked that the contents of this document correspond to the
hardware and software described. Nevertheless, differences might
exist and therefore we cannot guarantee that they are completely
identical. The information given in this publication is reviewed at
regular intervals and any corrections that might be necessary are
made in subsequent editions. We welcome all recommendations and
suggestions.
Subject to change without prior notice
Siemens-Aktiengesellschaft.