OfficeServ 7200
TECHNICAL MANUAL
1.3 POWER CONDITIONS
The power supply board of the OfficeServ 7200 system receives AC input power or
battery power, and supplies -48 V, -5 V, +5 V, +3.3 V, +12 V, and -56 V to the system
cabinet.
The rating is as follows:
• RATING: AC 110-120 V; 6 A; 50/60 Hz or DC 48 V 3 A
Power Supply Unit(PSU)
PSU
1.4 UNPACKING AND INSPECTION
The OfficeServ 7200 can be configured as a single cabinet or dual cabinet system.
All OfficeServ 7200 cabinets are identical when shipped from Samsung. After
unpacking the cabinet(s), inspect for signs of physical damage. If any damage is
detected, do not attempt to install the system. Contact Samsung Telecommunications
America Technical Support Department.
Check to see that each cabinet carton includes the following:
• OfficeServ 7200 cabinet
• AC Power Cable
• Rack Mount Side Flange Brackets (2)
• Rack Mount Cross Bar (1)
• Screw Pack
• Battery Cable Assembly
• Blanking Plates (3)
Table 1.1 Power Specifications
Input power
AC 110 V
DC 48V
(48VDC for battery backup ONLY)
Output power
- DC 48 V, 2.2 A
- DC +5 V, 8.0 A
- DC -5 V, 1.0 A
- DC +3.3 V, 10 A
- DC +12 V, 0.4 A
- DC -56 V, 0.4 A (for battery backup)
1.4
Home Page
INSTALLATION
PART 1 SEPTEMBER 2005
Specification
Table of Contents