Arris SURFboard SBG10 User Manual page 38

6. Enter the SBG10 Wi-Fi network name or SSID (ARRIS-####) for your SBG10 in the Network
name field.
The default SSID is listed on the Wi-Fi cable modem label on the bottom of your SBG10.
Note: You have the option to change your Wi-Fi network name or SSID after setting up
your Wi-Fi network connection. However, you must use the default SSID listed on the
Wi-Fi cable modem label after installing your SBG10. See
name (SSID)
7. Select the Wi-Fi Security level for your Wi-Fi network from the Security type drop-down
list.
Note: WPA2-Personal is the recommended Wi-Fi security level for your Wi-Fi home
network. It is the default security level for your SBG10 and the highest security level
available.
8. Select the password encryption type from the Encryption type drop-down list.
This is used for securing your Wi-Fi network.
•
TKIP – Temporal Key Integrity Protocol
•
AES – Advanced Encryption Standard (recommended). AES is the default encryption
type for the SBG10.
9. Enter a security code (passphrase) for your Wi-Fi network password in the Security Key
field.
You can use the default WI-FI SECURITY KEY listed on the SBG10 Wi-Fi Cable Modem label
or create your own personal network password.
Note: Remember to use a unique combination of letters, numbers, and special
characters to create a more secure password. See
49) for more information.
10. Select Hide characters checkbox to prevent your Security Key (network password) from
displaying in the field.
PN 365-095-32809 x.1
Copyright 2018, ARRIS Enterprises, LLC. All rights
Figure 38: Manually connect to a wireless network window
(page 47) for more information.
reserved.
Chapter 6: Setting up a Wi-Fi network connection
Change your Wi-Fi network
Prevent unauthorized access
SURFboard SBG10 Wi-Fi Cable Modem User Guide
(page
38