Brother KE-430F Service Manual page 75

Be careful not to drop the balancer.
(Remove)
（取り外す）
(Loosen)
（ゆるめる）
6. Screw
7. Set screw [Loosen]
8. Thread take-up crank
9. Bolts [2 pcs]
(Remove one, loosen one.)
10. Balancer plate
11. Balancer
12. Set screws [2 pcs: Loosen]
13. Rubber cap
14. Set screws [2 pcs: Loosen]
15. Set screws [2 pcs: Loosen]
16. Set screws [2 pcs: Loosen]
17. Set screws [2 pcs: Loosen]
18. Set screws [2 pcs: Loosen]
19. Screws [2 pcs]
20. Plain washers [2 pcs]
21. Bobbin winder unit
22. Set screws [2 pcs: Loosen]
23. Bolts [4 pcs]
24. Motor assembly
25. Thread trimmer cam
26. Joint assembly
27. Upper shaft
28. Pulley gear R
KE-430F, BE-438F
9. DISASSEMBLY
If the motor assembly
removed, insert the bolts 23 into these
two tapping holes and gradually tighten
them to remove the motor assembly.
cannot be
2539B
65