Reading Additional Pattern Data - Brother KE-430F Service Manual

7-4. Reading additional pattern data

1
2
For example, to read pattern
number 200
3
4
Ending read/write mode
5
While reading
Pattern number being
appears in the tension display
2657B 2658B
TEST indicator switches off
Select the " r 1" SD data read/write mode.
(Refer to "7-3. Preparation for reading and writing data".)
・ The number of the additional pattern data in the SD
card folder will appear in the tension display.
(The initial value displayed is "ALL".)
2651B
Press the
additional pattern that you would like to be read (ALL,
200 to 999).
・ When "ALL" is displayed, all of the additional pattern
data will be read at once.
・ The additional pattern numbers displayed will only be
those that are in the SD card folders. (If there is no
data on the card, "ALL" will be the only thing
displayed.)
2656B
Press the ENTER key.
・ The buzzer will sound and the selected pattern data
will be read from the folder on SD card and copied into
the sewing machine's memory.
・ If no additional pattern data exists, an error buzzer will
sound.
read
When the display returns to the status in step 1, reading
of the additional pattern data is complete.
・ If you would like to use any other read/write modes,
press the
run it.
2654B
Press the TEST key.
* To sew a pattern that you want to add, register a
program while referring to "5-2. Program setting
method" in the CD Instruction Manual.
2404B
KE-430F, BE-438F
7. USING SD CARDS
or key to select the number for the
or key to select the mode and then
2414B
45