Switching To Pattern Editing Mode; Checking Pattern Data - Brother KE-430F Service Manual

5. EDITING PATTERN DATA

5-3. Switching to pattern editing mode

1
2
3
2nd step

5-4. Checking pattern data

You can check the tension information (section numbers and tension codes) in pattern data.
1
2 End pattern editing mode
36
2628B
4441Q
TEST indicator switches off
KE-430F, BE-438F
While pressing the TEST key, press the
・ The pattern number will flash in the PROGRAM No.
display.
・ The number of stitches remaining until the final stitch
will be displayed in the menu display.
・ The section number will be displayed in the section
No. display. ". " means the start of a section.
・ The tension code will be displayed in the tension
display.
Press the or key to select the desired pattern
number.
* Only the pattern numbers which are currently
registered will be displayed.
Depress the foot switch to the 2nd step.
・ Home position detection will be carried out.
・ The pattern number will changed to illuminated.
From this point on, the condition is referred to as pattern
editing mode.
Carry out steps 1 to 3 in "5-3. Switching to pattern editing
mode" to switch to pattern editing mode.
When you press the or
clamp will move one stitch at a time.
・ The section number and tension code and the number
of stitches remaining until the final stitch are displayed
at the current position.
While holding down the SELECT key, press the
SECTION [+ -] key to automatically move the work
clamp/button clamp to the beginning of a section.
+: Moves in the forward direction
-: Moves in the reverse direction
Press the TEST key.
・ The display will return to the normal display and the
sewing machine will change to home position standby.
key.
2626B 2627B
key, the work clamp/button
2629B 2630B
2404B