Advertisement
10. On the back of the printer, remove the two screws that secure the cover
plate to slot 1 or slot 2, and remove the cover plate.
Note: You need to use the first available slot on the printer starting from the left
(slot 1).
11. Connect the dual slot I/O cable to the main board.
12. Connect the dual slot I/O cable to the RFID interface board. Use the
connector 1 for slot 1 and connector 2 for slot 2.
13. Slide the RFID interface board into the printer.
14. Secure the RFID interface board with the two screws you removed in Step 9
or with the two included M3x5 screws.
6
PX4ie/PX6ie RFID Kit Installation Guide
Advertisement
