Kenwood NX-5000 Series Function Reference page 96

1 DMR CONVENTIONAL SYSTEM
1.18 Remote Operation by Radio Communication (Remote Control)
Monitoring the Situation Around Another Transceiver by Remote Control (Remote
Monitor)
Remote Monitor is the function to remotely operate using radio communication an individually specified transceiver to
transmit continuously.
Use of this function allows the base station to monitor the situation around the transceiver.
If a PC sends the Remote transmission command to the transceiver, the transceiver will send a message requesting the
Remote transmission by using Individual Call. The target ID of the Individual Call is specified in Remote Control Mode or
by the Remote transmission command.
An individually specified transceiver can be controlled by sending a Remote Control message in Remote Control Mode and
by making the transceiver receive the message. (Refer to
The transceiver which has received the Remote Control message sends an acknowledgment to the transmitting transceiver,
and then unmutes the speaker and initiates a continuous transmission using Individual Call. The duration of the continuous
transmission is determined according to the configuration in Remote Monitor Timer (10 sec to 120 sec) of the transceiver
which has received the message requesting the Remote transmission.
Remote Monitor has a Normal Mode and a Silence Mode: the former is a mode notifying a user of the transceiver's status
of continuous transmission by an indication on the LCD and by lighting the Transmit LED, and the latter is a mode not
notifying a user of the transceiver's status of continuous transmission. Which mode is used is determined according to the
configuration in Remote Monitor Display of the transceiver which has received the message requesting the Remote
transmission.
0
If "On" is configured in Remote Monitor Display (Normal Mode)
The transceiver which received the message requesting the Remote transmission sends an acknowledgment to the
transmitting transceiver, and then displays "Remote TX" on the display and transmits with the Transmit LED lighting.
0
If "Off" is configured in Remote Monitor Display (Silence Mode)
The transceiver which received the message requesting the Remote transmission sends an acknowledgment to the
transmitting transceiver, and then transmits without changing the indication of LCD and without lighting the Transmit
LED.
DMR FUNC (K, F)/Ver 2.20
Sending a Remote Control Message in Remote Control
Sending a message
requesting the
Remote transmission n
Sending an
acknowledgment
Initiating a continuous
transmission
Figure 1-7 Remote Monitor
CONTENTS INDEX
Mode.)
79