Xen Topaz
S
2
E C T I O N
P
M
ROGRAMMING
ODE
System Start Up
2.1 Enter the Programming Mode
The
installer/system
programming mode from the Display Type Key Telephone. (Up to 2
users can enter to the mode at the same time.)
1. Press
(Do not lift the handset)
2. Dial
3. Dial the system password, and then press HOLD
For programming details, refer to the Programming Manual (separate publication).
2.2 Exit Programming Mode
1. Press DC several times to return to the "PRG No. Entering Screen".
2. Press SPK to exit.
The system will automatically save the customer data to memory which is backed up by a
lithium battery.
administrator
can enter
.
System Hardware Manual
to
the system
- 71