Advertisement
29. Slide the recorder chassis back into the outer case.
30. Refit the 4 fixing screws (M4) with the Torx key T20 (See ref. B, fig. 4).
31. Refit all the input/output boards.
32. Refit all the terminal blocks in the correct locations and then refit alll the grommets (See fig. 11).
33. Refit the rear cover.
34. Reconnect the mains supply to the power terminal block.
35. Refit the power supply terminal cover (See ref. E, fig. 11).
36. Turn ON the switch (See fig. 1).
37. Refit the chart cassette.
38. Switch ON the mains supply.
7
Advertisement
