Download Print this page

Honeywell 46190153-501 Manual page 8

Carriage motor kit

Advertisement

25. Move the printer carriage fully to the left hand side (See fig. 9).
26. Measure the drive belt tension with a dynamometer and adjust the belt tension by moving the carriage motor
(See ref. A, fig. 10).
27. Adjust the drive belt tension to the specified value, 5 N for 10 mm defection measured at the center of the belt
(See ref. B, fig. 10).
28. Tighten the 3 carriage motor fixing screws.
Figure 9
Figure 10
6

Advertisement

loading