Advertisement
12. Remove all the terminal blocks (See fig. 3).
D
(1) Press down on the terminal block clips.
(2) Pull to release the terminal block.
13. Remove all the grommets (See ref. A, fig. 4).
14. Unscrew the 4 fixing screws (M4) from the chassis with the Torx key T20 (See ref. B, fig. 4).
15. Slide the recorder chassis out of the case (See fig. 6).
16. Remove all the input/output boards.
WARNING: Make a note of the input/output board locations prior to removal.
Figure 3
Figure 4
3
Advertisement
