Cisco 6800 Series User Manual page 13

Calls
Procedure
Step 1
On the phone web page, click User Login > Voice > User.
Step 2 In the Call Forward section, set the Cfwd All, Cfwd Busy, Cfwd No Answer, or combination of them to
Yes, and enter a phone number for each of the call forwarding services that you want to enable:
• Cfwd All/Cfwd All Dest—Forwards all calls.
• Cfwd Busy/Cfwd Busy Dest—Forwards calls only if the line is busy.
• Cfwd No Answer/Cfwd No Ans Dest—Forwards calls only if the line is not answered.
• Cfwd No Answer/Cfwd No Ans Delay—Assigns a response delay time in seconds.
Step 3
Click Submit All Changes.
Related Topics
Activate Call Forward All with Feature Activation Code Synchronization
Your administrator enables a feature activation code that synchronizes the phone with the server to forward
all calls. When you activate the feature on the phone, you see a call forwarding
of the phone screen.
Note
The Feature Activation Code Synchronization feature only supports Forward all. Forward busy and Forward
no answer are not supported.
Procedure
Step 1 Press Forward.
Step 2
Do any of the following:
• Enter the target number, to which you want to forward incoming calls from this phone line.
• Press Contacts and select a contact from your contact directories.
• Press Redial and select an entry from the Placed calls list.
Step 3
Press Call to forward all calls to the specified number.
If your administrator disables the feature key synchronization (FKS) and XSI sync for call forwarding
on your phone, you can enter the value as number of seconds after which call needs to be forwarded.
If your administrator enables feature key synchronization (FKS) or XSI sync for call forwarding on your
phone, you can enter the value as number of rings after which call needs to be forwarded.
The call forwarding settings on the phone web page take effect only when FKS and XSI are disabled.
For more information, consult your administrator.
Phone Web Page Preferences
Phone Web Page
Activate Call Forward All with Feature Activation Code Synchronization
icon displayed at the top
Calls
13