Cisco SPA525G Quick Start Manual page 3

Step 5. Press Scan softkey for scanning the cell phone. The active cell phone will be
displayed in the Select a Bluetooth device pair list. Choose the appropriate cell phone and to
proceed press the Connect softkey.
Step 5. Final settings are displayed in the Edit Bluetooth Profile list. Press Connect softkey.
Check the cell phone.
Step 6. A connection request will pop up on the cell phone asking for the PIN. The default
PIN is "0000". Enter PIN and allow the SPA525G/SPA525G2 to get connected with the cell
phone. The cell phone after connection will be displayed in the Select Bluetooth Profile list
on the SPA525G/SPA525G2.