Fastening Support Wheels; Fastening Safety Guard; Refilling Battery Acid - Husqvarna Rider 850 Workshop Manual

Before delivery

Fastening support wheels

Fasten the support wheels with axles, spacers and
nuts in the support wheels holder.

Fastening safety guard

On Rider 1030 Bioclip and Rider 1200, a safety
guard is to be assembled.
Screw the four accompanying screws into the
engine guard holder.
6
– English

Refilling battery acid

The battery is delivered dry from the factory.
• Slowly fill the battery acid up to the mark on the
battery.
• Wait 20 minutes and fill, as is required, with more
battery acid.
• Charge the battery (12V, 6A) for one hour.
• Check the level of acid and fill, as is required,
with distilled water up to the correct level.
!
WARNING!
The battery acid is highly corrosive. Use
rubber gloves and protective glasses. Avoid
breathing in the acid fumes.
Measures for contact with acid
External: Rinse thoroughly with water.
Internal: Drink large quantities of water or
milk. Contact a doctor as soon as
possible.
Eyes: Rinse thoroughly with water.
Contact a doctor as soon asap.
The battery gives off explosive gas. Sparks,
naked flames and cigarettes must absolutely
not be in the near vicinity of the battery.