Advertisement
Mounting the Transmitter Device
•
Align the rounded corner at the lower of the main module with the sim-
6
ilar rounded corner at the bottom of the mounting bracket assembly
•
Slide the main module backward while pushing the main module up
after connecting with a mounting bracket so that the PCB and con-
nector and tubes engage simultaneously.
Ensure the PCB, connector, and tubes are fully engaged by firmly push-
7
ing the main chassis horizontally backward on the mounting bracket
assembly. DO NOT PUSH ON THE LCD AS THIS MAY DAMAGE IT.
•
Align the two fixing screws located at the bottom of the chassis with
8
the screw threads on the mounting bracket assembly.
•
Tighten the screws to secure the chassis to the mounting bracket
assembly.
2 X
7
8
6
Advertisement
