Advertisement
Quick Links
Advertisement
Related Manuals for Bang & Olufsen BeoLab 9
Summary of Contents for Bang & Olufsen BeoLab 9
- Page 1 BeoLab 9 Guide...
- Page 2 WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not expose this equip ment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment. To completely disconnect this equipment from the AC Mains, disconnect the mains plug from the wall socket.
- Page 3 Contents This Guide describes how to set up Daily use, 4 a pair of loudspeakers and prepare Information about how to use the loudspeakers, about the built-in protection them for use. The Guide provides system, and how to clean the loudspeakers. useful information when you set up the loudspeakers for the first Set up the loudspeakers, 5...
- Page 4 Daily use When you have finished setting up The indicator light is positioned behind the exposed speaker membrane in the acoustic lens. the loudspeakers as described on the following pages, connect the entire system to the mains supply. The indicators light up in red, indicating that the loud speakers are in standby, ready to be used.
- Page 5 Set up the loudspeakers We recommend that you follow The loud speakers must be placed standing upright on the base on a firm and level surface. this procedure when you set up the loud speakers: – Disconnect your system from the mains supply.
- Page 6 Cable connections The loudspeakers can be used with The sockets and the two switches are located on the rear of the loudspeaker. Remove the Bang & Olufsen audio, video and cover to get access to the sockets and switches. link systems. They may also be connected to non-Bang &...
- Page 7 Power Link Mk 3 Power Link cables: The cables must be of the type which are marked with a triangle on the LEFT RIGHT LEFT RIGHT plug. Do not use any of the old type of Power Link cables, as this will cause noise, and thus not give optimum sound quality! Power Link connections: These connections carry both the right and left sound signals.
- Page 8 Adapt the loudspeakers to your room How to measure? The distances referred to The loudspeakers may be placed are measured as shown here (the loudspeaker almost anywhere in you room. seen from above). However, the most natural sound is obtained if they are set up as explained on these pages.
- Page 9 BeoLab 2 to the sensitivity levels of different loud speakers. If you set up a pair of BeoLab 9 loudspeakers in a system with BeoLab 2, we recommend that Example 1: The loudspeakers are placed in Example 2: One loudspeaker is placed against you set the BeoLab 2 SETUP switch to 1.
- Page 10 Waste Electrical and Electronic Equipment electronic equipment, batteries and waste (WEEE) – Environmental protection prevents the potential contamination of nature Electrical and electronic equipment, parts and with the hazardous substances which may be batteries marked with this symbol must not be present in electrical and electronic products disposed of with normal household wastage;...
- Page 11 For the US-market only! This product is in conformity with NOTE: This equipment has been tested and the provisions of the Directives found to comply with the limits for a class B 2004/108/EC and 2006/95/EC. digital device, pursuant to part 15 of the FCC Rules.