NEC Electra Elite IPK II Features And Specifications Manual page 45

Electra Elite IPK II
To enter an Account Code for an incoming call:
This procedure is not available for single line telephones.
1. Answer incoming call.
 If Account Codes for Incoming Calls is disabled, the following steps will dial digits out onto the connected trunk.
2. Dial .
,
3. Enter the Account Code (1~16 digits).
You can enter any code of the proper length.

4. Dial .
,
To enter a Forced Account Code at a single line telephone:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for more information.

With Forced Account Codes, you hear, "Please enter an Account Code."(depending on programming).

2. Dial .
,
3. Enter Account Code (3~16 digits).
4. Dial .
,
5. Dial number you want to call.
If you hear "stutter" dial tone after dialing the number, ARS is requesting you to enter an ARS Authorization

Code. Refer to the
Codes.
Account Code – Forced/Verified/Unverified
Automatic Route Selection on page 2-65 feature for more information on ARS Authorization
Document Revision 1
2 - 23