Honda F220 Owner's Manual page 40

Clutch cable adjustment
1.Remove the two screw bolts
from front cover, and remove
the front cover.
2.Set the handlebar height in the
center position (see page 24).
3.Push and hold the lock lever. Measure the spring lengths when the
clutch lever is operated to the DISENGAGED and ENGAGED
positions.
4.With the clutch lever ENGAGED, adjust so that the extension value
of the clutch spring is as measured below.
Extension value:
A (ENGAGED) - a (DISENGAGED) = 2±0.5 mm (0.08±0.02 in)
PUSH
LOCK LEVER
5.Loosen the lock nut and turn
the adjusting nut to obtain
the correct extension value of
the clutch spring. After
adjustment, tighten the lock
nut securely.
6.Reinstall the front cover.
38
Squeeze
(ENGAGED)
Release
(DISENGAGED)
SCREW BOLTS
FRONT COVER
CLUTCH SPRING
<Main clutch lever DISENGAGED>
a
<Main clutch lever ENGAGED>
A
INCREASE
EXTENSION
VALUE
ADJUSTING NUT
LOCK NUT
DECREASE
EXTENSION
VALUE