4.13
Step 13: Reset the E-SBC
After you have completed the configuration of the E-SBC described in this chapter, save
("burn") the configuration to the E-SBC's flash memory with a reset for the settings to take
effect.
To save the configuration to flash memory:
1.
Open the Maintenance Actions page (Maintenance tab > Maintenance menu >
Maintenance Actions).
2.
Ensure that the 'Burn to FLASH' field is set to Yes (default).
3.
Click the Reset button.
AudioCodes Mediant E-SBC
Figure 4-39: Resetting the E-SBC
62
SV9100 IP-PBX & BroadCloud SIP Trunk
Document #: LTRT-12490