Name And Concentration Of Hazardous Substances - GE LOGIQ V2 User Manual
Hide thumbs
Also See for LOGIQ V2:
- Technical publication (127 pages) ,
- Basic service manual (317 pages)
Table of Contents
Advertisement
Name and Concentration of Hazardous Substances
Table 4-5:
Table of hazardous substances' name and concentration for LOGIQ V2/
Component Name
LCD Panel
Printed Circuit Board
Assemblies
Keyboard Assemblies
Power Assemblies
Battery
Ultrasound Probes
This table is prepared according to SJ/T 11364.
O: Indicates that hazardous substance contained in all of the homogeneous materials for this part is below
the limit requirement in GB/T 26572.
X: Indicates that hazardous substance contained in at least one of the homogeneous materials used for
this part is above the limit requirement in GB/T 26572.
• Data listed in the table represents best information available at the time of publication.
• Applications of hazardous substances in this medical device are required to achieve its intended clinical
uses, and/or to provide better protection to human beings and/or to environment, due to lack of reasonably
(economically or technically) available substitutes. For example: Lead is could be used in Printed circuit
solder.
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
LOGIQ V1
Pb
Hg
X
O
X
O
X
O
X
O
X
O
X
O
–
User Guide
Hazardous substances' name
Cd
Cr (VI)
O
O
O
O
O
O
O
O
O
O
O
O
Safety Precautions
PBB
PBDE
O
O
O
O
O
O
O
O
O
O
O
O
4-31
Advertisement
Table of Contents
