AEG MPS 5693 Instruction Manual page 20

Manicure-pedicure-set
Hide thumbs Also See for MPS 5693:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 15
English
20
NOTE:
• The indicator lamp lights up red during charging operation.
• The lamp does not indicate the charging status of the appliance.
• It is normal for the appliance to heat up during charging.
• If the rechargeable battery is empty, the appliance can be operated via mains
power. In order to do so, connect the mains adapter directly to the appliance.
5. Stop any charging operation after a maximum of 4 hours.
CAUTION:
Always disconnect the plug from the wall socket after 4 hours of charging.
NOTE on battery life:
• Charge the battery only when it is almost empty.
• Charge the appliance at an ambient temperature between 0 °C and + 40 °C.
USING THE APPLIANCE
NOTE:
Wash your hands and feet or apply lotion to them only after treatment.
1. Turn on the appliance. The appliance has two speed levels. Start with the low
speed setting.
2. Gently run the attachment past the treatment area.
3. In order to prevent injuries, check the progress of the treatment continuously at
short intervals.
Nail Dryer
Connect the mains adapter with the connector of the storage box to use the nail
dryer. Carefully place your painted fingernails into the dryer. Also push the switch
down with your fingers.
MPS5693_IM_D_GB_CZ_HR_PL_RO_SK_BG
06.11.17

Advertisement

Table of Contents
loading

Table of Contents