Sharp Auvi MD-DR77 Operation Manual page 119

To cancel each registered track:
1. Press the MODE button on the remote control until "MY" is
displayed.
2. Select the track you wish to cancel by pressing the
button.
3. While the selected track is playing, press the
the remote control for 2 seconds or more.
To cancel all favorite track at once:
1. Insert a MiniDisc with "favorite tracks".
2. In the stop mode, press the MENU button on the main unit.
3. Select "SET UP" by pressing the
press the MENU button.
4. Select "MY DELETE" by pressing the
and press the MENU button.
5. Press the MENU button. All favorite tracks are now canceled.
Intro play
(page 63)
This function plays the beginning of each track for 9 seconds.
1. While playback is stopped, press the
onds or more.
2. Press the button when you reach the track you wish to
listen to. Normal playback will resume.
Note:
Intro play is available only when normal playback or all track re-
peat playback is selected.
To adjust playback speed
[On the main unit]
1. During playback, press the MENU button.
2. Select "PLAY SPEED" by pressing the
and press the MENU button.
or
button on
or button and
or button
button for 2 sec-
(pages 64 - 65)
or button
1-BIT PORTABLE MINIDISC RECORDER MD-DR77
3. Select a speed by pressing the
press the MENU button.
To return to normal speed, select "± 0%".
[On the remote control]
1. During playback, hold down the MODE button for 2 seconds
or more.
2. Within 10 seconds, select a speed by pressing the
button. Move ♪ to adjust the speed.
3. Press the MODE button to complete the setting.
To return to normal speed, move ♪ to the
SETTING THE ALARM
[On the main unit]
1. During playback or in the stop mode, press the MENU but-
ton.
2. Select "ALARM" by pressing the
press the MENU button.
3. Select "ON" by pressing the
the MENU button.
4. Select the time by pressing the
press the MENU button.
You can set the time from 1 to 99 minutes.
When the set time comes:
The alarm beeps repeatedly for one minute from the headphones.
To stop the beep sound:
Press any button on the main unit or the remote control.
To change the set time:
Repeat the operation from step 1.
To cancel the alarm setting:
Select "OFF" in step 3.
or button and
or
position.
(pages 66 - 67)
or button and
or button and press
or button and
119