Receiving A Call; Switching Between Using The Speakerphone , Handset , And Headset; Memory; Storing A Number - GE 29484 User Manual

R C
ECEIVING A
When the phone rings, the corresponding line's indicator flashes rapidly.
1. Press the SPEAKER button. The speakerphone comes on automatically
and selects a line.
2. When you are finished, press the SPEAKER button again.
S B
WITCHING ETWEEN
H
EADSET
• To switch to the speakerphone, press SPEAKER. The speakerphone
indicator turns on.
• To switch to the handset, pick up the handset. The speakerphone or
headset turns off.
• To switch to the headset, press HEADSET. The headset indicator turns on.
M
EMORY
Each of the 8 memory buttons has the capability of storing 2 separate
telephone numbers (up to 32 digits each). Each memory button accesses
an upper and a lower memory location. The LOWER button accesses those
numbers stored in the lower memory locations. You can program the
memory when the unit is idle or when you are using the phone.
S N
TORING A UMBER
1. Press the STORE button. The red indicator blinks indicating the unit is in
Store Mode.
2. Enter the phone number you want to store using the keypad digits.
3. Press STORE again.
4. Press the memory location button (1-8) where you want to store the
number. If you want to store it in upper memory, simply press the
memory location button. If you want to store it in lower memory, press
the LOWER button. The red indicator stays on. Press the memory
location button where you want to store the number.
ALL
U
SING THE
S
PEAKERPHONE
, H ,
ANDSET AND
19