Makita JR001G Instruction Manual
Hide thumbs
Also See for JR001G:
- Instruction manual (69 pages) ,
- Instruction manual (29 pages) ,
- Instruction manual (65 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita JR001G
Summary of Contents for Makita JR001G
- Page 1 INSTRUCTION MANUAL Cordless Recipro Saw JR001G Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: JR001G Length of stroke 32 mm Strokes per minute High (2) 0 - 3,000 min Low (1) 0 - 2,300 min Max. cutting capacities Pipe 130 mm Wood 255 mm Rated voltage D.C. 36 V - 40 V max... -
Page 3: Ec Declaration Of Conformity
Do not abuse the cord. Never use the cord for NOTE: The declared vibration total value(s) has been carrying, pulling or unplugging the power tool. measured in accordance with a standard test method Keep cord away from heat, oil, sharp edges and may be used for comparing one tool with another. - Page 4 Use power tools only with specifically desig- nated battery packs. Use of any other battery packs may create a risk of injury and fire. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery termi- nals together may cause burns or a fire.
- Page 5 It may result in loss of your CAUTION: Only use genuine Makita batteries. eyesight. Use of non-genuine Makita batteries, or batteries that Do not short the battery cartridge: have been altered, may result in the battery bursting Do not touch the terminals with any con- causing fires, personal injury and damage. It will...
-
Page 6: Functional Description
Overload protection FUNCTIONAL When the battery is operated in a manner that causes DESCRIPTION it to draw an abnormally high current, the tool automat- ically stops without any indication. In this situation, turn the tool off and stop the application that caused the tool CAUTION: Always be sure that the tool is to become overloaded. Then turn the tool on to restart. switched off and the battery cartridge is removed Overheat protection before adjusting or checking function on the tool. When the tool or battery is overheated, the tool stops Installing or removing battery automatically and the lamp blinks. In this case, let the... - Page 7 Selecting the speed Switch action High speed is suitable for cutting soft materials such as wood. Low speed is suitable for cutting hard materials CAUTION: Before installing the battery car- such as metal. tridge into the tool, always check to see that the switch trigger actuates properly and returns to Material Lock/speed...
-
Page 8: Adjusting The Shoe
The hook is convenient for hanging the tool temporarily. Adjusting the shoe To use the hook, simply lift up hook until it snaps into the open position. When the recipro saw blade loses its cutting efficiency When not in use, always lower hook until it snaps into in one place along its cutting edge, reposition the shoe the closed position. to utilize a sharp, unused portion of its cutting edge. This Electronic function will help to lengthen the life of the recipro saw blade. The position of the shoe can be adjusted in 6 levels. -
Page 9: Maintenance
OPTIONAL ACCESSORIES OPERATION CAUTION: These accessories or attachments are recommended for use with your Makita tool CAUTION: Always press the shoe firmly specified in this manual. The use of any other against the workpiece during operation. If the accessories or attachments might present a risk of shoe is removed or held away from the workpiece injury to persons. Only use accessory or attachment... - Page 12 Makita Europe N.V. Jan-Baptist Vinkstraat 2, 3070 Kortenberg, Belgium Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885755A222 www.makita.com 20190822...