Table of Contents
Advertisement
Checking and modifying the current route
• New Route:
Touch this key to plan a new route to the
newly selected location. The previous
destination and waypoint(s) are deleted.
• Waypoint:
Touch this key to add the newly selected
location as a waypoint to your route. The
other destinations of the route remain
intact.
The new waypoint is placed among
destinations to keep the route optimal. To
decide where a waypoint to appear, use the
"Edit Route" menu.
• Final Destination:
Touch this key to append the newly
selected destination at the end of the route.
The other destinations of the route remain
intact. The previous final destination is now
the last waypoint.
Setting a new starting position for the
route
For normal navigation, all routes are planned
from the current position. In order to check
future routes, simulate them or see their
length in time and distance, you can turn off
the GPS receiver. Then you can set the
starting point of the route to a different
location than the current GPS position.
1. Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch [My Route] on the "Navigation
Menu" screen.
3. Touch [Edit Route] when you already have
a route.
54
4. Touch
on the first line (normally the
current GPS position) and confirm your
action on the warning message screen.
5. Touch [Set Start Point].
6. Select the start point of the route the
same way as you select a destination.
7. Touch [Set Start].
8. Select [Go] when the new start point is
set.
Advertisement
Table of Contents
