Setting The Vehicle Parameters - Pioneer MZ360500EX Owner's Manual

Checking and modifying the current route
3. Touch [Route Settings].
4. Touch [Vehicle], then touch the vehicle
type you use.
You can select from the following vehicle
types:
• Car:
– Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
– Roads are used only if access for cars is
allowed.
– Private roads and resident-only roads
are used only if they are inevitable to
reach the destination.
– Walkways are excluded from routes.
• Bus:
– Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
– Roads are used only if access for buses
is allowed.
– Private roads, resident-only roads and
walkways are excluded from routes.
• Taxi:
– Manoeuvre restrictions and directional
constraints are taken into account when
planning a route.
– Roads are used only if access for taxis is
allowed.
– Private roads, resident-only roads and
walkways are excluded from routes.
This system calculates the route optimised for
the new vehicle type. The orange line now
shows the new recommended route.

Setting the vehicle parameters

You can edit the parameters of the vehicle
profile.
1. Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch [More...], then [Settings].
3. Touch [Route Settings].
4. Touch [Vehicle].
5. Touch next to the vehicle profile that
you want to modify.
6. Scroll the list and touch any of the lines to
change the parameters.
• Name:
Touch this key to rename the profile.
• Fuel Consumption Urban:
Enter the average consumption of your
vehicle when used in built-up areas. The
unit for consumption can be set in
"Regional" settings.
• Fuel Consumption Rural:
Enter the average consumption of your
vehicle when used on motorways. The unit
for consumption can be set in "Regional"
settings.
51