Checking And Modifying The Current Route; Displaying The Route Overview; Checking Route Parameters And Accessing Route Related Functions; Modifying The Route Calculation Conditions - Pioneer MZ360500EX Owner's Manual

Checking and modifying the current route

Displaying the route overview

Check ing and modifying the current route
1. Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch [My Route] on the "Navigation
Menu" screen.
3. Touch [Overview].
The current route is displayed in its full length
on the map together with additional
information and controls.
Checking route parameters
and accessing route related
functions
You can check different parameters of the
route recommended by the navigation
system.
1. Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch [My Route] on the "Navigation
Menu" screen.
The following information is displayed on this
screen:
Name and/or address of the destination
Warning icons (if any)
They provide extra information about your
route (e.g. unpaved roads or toll roads to be
taken).
Total time of the route
Total length of the route
50
The symbol of the vehicle type used in
route calculation
Route planning method (e.g. Fast)
Estimated delay calculated from traffic
events on your route
The following options are available.
For details, refer to "Registering and editing
locations" on page 58.
• Edit Route:
Touch this key to add or remove
destinations or change their sequence. You
can also set a route start point other than
your current location. This can be useful to
plan and save a future map.
• Overview:
Touch this key to display the entire route on
the map.
• Avoidances:
Touch this key to bypass a part of the route.
• Cancel Route:
Touch this key to delete the current route.
• More:
Touch this key to open a list with more
options like selecting from route
alternatives, changing route parameters,
simulating the route, saving the current
route or loading a previously saved route.
• Back:
Touch this key to return to the "Navigation
Menu" screen.
Modifying the route
calculation conditions
You can modify the conditions for route
calculation and recalculate the current route.

Changing the vehicle used

You can set the type of vehicle you will use to
navigate the route. Based upon this setting,
some of the road types can be excluded from
the route, or some of the restrictions may not
be taken into account in route calculation.
1. Touch [Menu] on the map screen.
The "Navigation Menu" screen appears.
For details of the operations, refer to
"Screen switching overview" on page 27.
2. Touch [More...], then [Settings].