Table of Contents
Advertisement
6-11-7. Installation of the DMSA-SBE1
1. Set the POWER switch of the DMSA-SBE1 to the I
(ON) position.
DMSA-SBE1
2. Fix the two monitor fixing plates with the four screws
(PWH4 x 8).
3. Fix the DMSA-SBE1 by the belt supplied with the
monitor fixing plate as shown in the following illustra-
tion.
When drives are installed in the two slots
of upper and lower slots of the console.
Monitor fixing plate
When drives are installed in the lower slot
only of the console.
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
POWER switch
DMS-B150L/B210S
PWH4 x 8
PWH4 x 8
Monitor fixing plate
PWH4 x 8
PWH
4 x 8
Monitor fixing plate
Monitor fixing plate
6-11. Installing the Package Supporting Equipment
DMS-EX150L/EX210S
DMS-B80L/B110S
Belt
Belt
6-73
Advertisement
Table of Contents
