Honeywell HCC-960 Series Operation Manual page 19

5.8.5 Image setting
Select IMAGE SETUP and press + or – button to enter
submenu. It will show as in Fig.5-14.
<< IMAGE SETUP >>
MIRROR OFF
D.ZOOM OFF
H.RES 6
SAVE & EXIT
RETURN
<Fig.5-14 Image Setup>
① Mirror setting
OFF  H.MIR  V.MIR  FLIP
MIRROR
② Digital Zoom setting
To use this function, set D.ZOOM to ON and
exit OSD MENU pressing SAVE & EXIT.
Maximum zoom is up to x256.
UP button: ZOOM IN, DOWN button: ZOOM OUT
OFF  ON
D.ZOOM
③ High Resolution level setting
OFF  1  ...  8
H.RES
5.8.6 Software Day & Night mode setting
The NIGHTSHOT SETUP allows to set the camera
reaction under low light illumination and switch mode
between Day and Night modes.
AUTO – Day and Night modes change by auto
detecting luminance.
ON – Night mode
OFF – Day mode
OFF  AUTO>  ON
NIGHTSHOT
Fig.5-15 is the submenu of NIGHTSHOT AUTO.
<< NIGHTSHOT SETUP >>
DWELL 5
D2N LEVEL 5
N2D LEVEL 5
BURST OFF
COLOR B/W
SAVE & EXIT
RETURN
<Fig.5-15 Nightshot Setup>
① Dwell time setting
DWELL 1 ~ 30
② Day to Night level setting
D2N LEVEL 0 ~ 10
③ Night to Day level setting
N2D LEVEL 0 ~ 10
④ Burst signal setting
OFF  ON
BURST
⑤ Color setting
B/W  COLOR
COLOR
5.8.7 Factory Default
All changed settings are returned to shipping condition.
For Initialization, select "FACTORY"
and push + or - button.
☞ caution
1. Keep in mind that this mode reset all changed data
back to shipping condition.
2. Some menu such as LENS SEL, CAMERA ID, etc are
not initialized.
19