Honeywell HCC-960 Series Operation Manual page 17

5.8.2 Privacy Zone Masking setting
PZM (Privacy Zone Masking) is to hide the selected view
for privacy protection.
<< PZM SETUP >>
ZONE NUMBER 1
DISPLAY OFF
SIZE SET
ALPHA 1
MOSAIC OFF
COLOR BLUE
SAVE & EXIT
RETURN
<Fig.5-10 PZM Setup>
① PZM zone setting
ZONE NUMBER 1 ~ 16
② PZM Display setting
OFF  ON
DISPLAY
③ PZM size setting
Press + or – button to set PZM size and position.
- set the PZM size using direction buttons
(+,-,UP,DOWN)
- press MENU button in order to change the position.
- set the PZM position using direction buttons.
- press the MENU button more than 2 seconds
to exit size and position setting menu.
④ PZM alpha blending setting
ALPHA 0 ~ 3
⑤ Mosaic function setting
OFF  ON
MOSAIC
⑥ PZM color
BLUE  GREEN  YELLOW  CYAN
COLOR
 MAGENTA  BLACK  D.GRAY 
L.GRAY  WHITE  RED
5.8.3 Motion Detection setting
The camera detects an object's movement by sensing
disparity of outline.
<< MD SETUP >>
AREA SEL.
SENSITIVITY 128
DISPLAY TRACE
BRIGHTNESS 8
SAVE & EXIT
RETURN
<Fig.5-11 MD Setup>
① AREA SEL.
In AREA SEL. menu, you can set zone, function
off/on, frame size.
② Sensitivity setting
If the value is lower, it has higher sensitivity.
SENSITIVITY 0 ~ 255
③ Display setting
TRACE: display the trace with small squares when
object's movement is detected.
FRAME: display the zone when object's movement
is detected in the zone.
TRACE  FRAME
DISPLAY
④ Brightness setting
BRIGHTNESS 0 ~ 15
17