Getting To Know The Etherfast 10/100 Lan Card - Linksys 10/100 LAN Card 10/100 User Manual

EtherFast ® 10/100 LAN Cards
Getting to Know the EtherFast
10/100 LA N Card
LEDs
Link/Act
100
The RJ-45 Port
The RJ-45 Port is where you will connect your Category 3 or 5 network cabling.
See page 67 for detailed information on network cabling.
The Link LED will illuminate when the card has been suc-
cessfully connected to a network and flicker when data is
being transmitted or received over
the network.
The 100 LED will illuminate when
the card is operating at 100Mbps.
If the 100 LED is not illuminated
and the PC is powered on, the card
is operating at 10Mbps.
N N o o t t e e : : Some 10/100 LAN
Cards may have the 100
LED labeled Speed. The
LEDs all operate as
shown above, however,
regardless of how they're
labeled.
3