Philips SmartPro Active User Manual page 24

English
24
Replacing the rechargeable battery
You can order spare side brushes as part of replacement kit FC8068. This kit
also contains two filters and three dry wipes.
1 Make sure that the power switch is in 'off' position.
2 To replace the side brushes, grab the old side brushes by the bristles and
pull them off their shafts.
3 Push the new side brushes onto the shafts.
Replace the rechargeable battery when you can no longer recharge it or
when it runs out of power quickly. You can order a new rechargeable battery
under order number CP0113 for FC8820 and CP0112 for FC8810.
1 Make sure that the power switch of the robot is in 'off' position.
2 Let the robot run until the rechargeable battery is empty to make sure
that the rechargeable battery is completely discharged before you
remove it and dispose of it.
3 Push and slide the battery cavity cover off the robot.
4 Remove the old rechargeable battery from the battery cavity.