Cisco Webex Room Panorama Installation Manual page 47

20.1 Mount the lower corner panels
Repeat the procedure on both sides.
1. Add a small bracket to the middle rail, and
fasten with a screw ( ).
M6x12
Do not tighten the screw now.
flexibility when aligning all panels later.
2. Place the corner panel onto the profiles.
Make sure to fit the groove of the panel fully onto both profiles, and
You need the check that the slots at the rear side of the panel enters the screws with
spacers.
Screw with Profiles Screw with
spacer spacer
The slots at the rear side
of the panel shall enter the
screws with spacers.
Fit the panel groove fully
onto the profile
(cross section, lower corner)
45