Advertisement
Analogue Input Card
The Analogue Input card is available as a 4, 6 or 8 channel card; whatever the number of channels, installation and
operation is exactly the same. (Only 6 channel boards are available for the eZtrend recorder)
An Analogue Input card can be fitted in slots A to F of an Multitrend recorder, slots A and B on a Minitrend recorder or
slot B on a eZtrend recorder.
Each slot is allocated 8 possible channels, so if two 6 channel boards are fitted they will be numbered A1 to A6, and A9
to A14 in the menu system. Channels always use three connections on the rear connector, and always start from the
left.
Connections
CH1
The connections for each channel are the same; the diagrams below show the correct connections for each input type;
Note: For a 4 wire RT connect as shown for 3 wire, leave the 4th wire disconnected.
43-TV-33-56 iss.4 GLO Aug 19 UK
CH2
CH3
CH4
CJC
CH5
CH6
CH7
Figure 7
Analogue In
Connections
CH8
4
Advertisement
