Advertisement
Segment
Number
Segment
Type
Loop 1 Target
Setpoint
Loop 2 Target
Setpoint
Segment
Ramp Time
Segment
Ramp Rate
Segment
Dwell Time
Number of
Loops
Back to
Segment
Number
Global Technical Assistance Center
Shows Profile statement being created.
Ramp Time (Time to reach Target Setpoint)
Ramp Rate (Rate of change to a Target Setpoint)
Step (Jump to a target Setpoint)
Dwell (Keep current Setpoint)
Hold (Hold Profile until released)
Loop (Back to Previous Setpoint)
Join (Connect to another Profile)
End (terminate Profile)
Repeat Segment Then End (Repeat a sequence of joined
Profiles)
The Sepoint Value to be reached by Loop 1 at the end of the
segment.
The Sepoint Value to be reached by Loop 2 at the end of the
segment.
Time to ramp to next Segment Setpoint (hh.mm.ss)
Rate of Change to Target Setpoint (.001 to 9999.9 Units/Hour)
Time to stay at Current Setpoint (hh.mm.ss)
If the Segment type is Loop, enter the number of times to
repeat the Loop
If the Segment type is Loop, enter the segment to loop back to
Page 9
Advertisement
