Advertisement
Create a
Enter a
profile
Profile Name
Number Of
Loops
Profile
Starting
Setpoint
Profile Start
Trigger
*Recorder Version
Only
Profile Start
Time
Profile Start
Day
Profile Start
Delay time
Profile
Recovery
Method
Profile
Recovery
Time
*Recorder Version
Only
Profile Abort
Action
How many
times to Cycle
a Program
Global Technical Assistance Center
Unique Descriptive name up to 16 characters
1
2
*Two Loop Option
Cascade
*Two Loop Option
Current Setpoint
Process Variable
None
After Delay
Day and Time
If Day and Time trigger is selected, this is the Hour and
Minute the Profile will run
If Day and Time trigger is selected, this is the Days the Profile
will run
If After Delay Start trigger is selected, this is the time in Hours
and Minutes the Profile will run after a start request.
Control Outputs off
(Caution this will stop all control)
Restart Profile from the beginning
Maintain Last Profile Setpoint
Use Controller Setpoint
Continue Profile from where it was when power failed
00.00 Program start immediately after Power restore
00.01 to 99.59 (HR.MN) Profile will continue after set time
Control Outputs off
(Caution this will stop all control)
Maintain Last Profile Setpoint
Use Controller Setpoint
The number of times the Program should cycle. (1 to 9999 or
Infinite)
Page 8
Advertisement
