Cisco 1100 Series Manual page 10

Install and Remove Small Form Pluggable Modules
Item
1
2
Install and Remove Small Form Pluggable Modules
This section describes how to install and remove Small Form Pluggable (SFP) modules in the Cisco 1100
Series ISRs. The information is contained in the following sections:
Install Small Form Pluggable Module
This section describes how to install optional small-form-factor pluggable (SFP) modules in the Cisco ISR1000
series Integrated Services routers to provide optical Gigabit Ethernet connectivity.
Only SFP modules certified by Cisco and complies with IEC 60825-1:2014 are supported on these routers.
For more information, refer to
Note
The SFP module-GLC-GE-100FX V01 is not supported on the Cisco111x Series.
Warning
Class 1 laser product. Statement 1008.
Remove Small Factor Pluggable Module
To remove a small factor pluggable (SFP) module from the router:
Warning Invisible laser radiation may be emitted from the end of the unterminated fiber cable or connector. Do not
view directly with optical instruments. Viewing the laser output with certain optical instruments (for example,
eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose an eye hazard.
Install and Upgrade Internal Modules and Field Replaceable Units
10
Install and Upgrade Internal Modules and Field Replaceable Units
Description
Micro-SIM 1 (Towards the device)
Micro-SIM 0 (Away from the device)
SFPs Supported on Cisco 1100 ISRs.