Cisco 6901 Manual page 2

Install Phone on Wall Mount Plate
Install Phone on Wall Mount Plate
To install the phone on the wall mount plate, perform these steps:
Procedure
Step 1 Plug the telephone line cord (RJ45 connector) into the phone jack at the base of the phone.
Figure 2: RJ45 Connector in the Phone Jack
1
2
Step 2
Plug the RJ45 connector into the wall mount phone jack.
Figure 3: RJ45 Connector in the Wall Mount Jack
Cisco Unified IP Phone Wall Mount
2
Network Port on the Phone
RJ45 Connector
Cisco Unified IP Phone Wall Mount