Craftsman 65018 Assembly Instructions Manual page 19

Shed Assembly – Headers/
22
W
Z
2
Raise ridge beam (T) up and into rear roof ridge beam
bracket. Secure with one 2" hex bolt (W) and one nut (Z).
Note: Alignment of ridge beam to bracket may require
header panels to be pushed inwards or outwards
slightly as ridge beam is slid into place.
24
Continued
1
T
HH
1
23
W
2
Slide ridge beam (T) into front roof ridge beam bracket.
Secure with one 2" hex bolt (W) and one nut (Z). Note:
Alignment of ridge beam to bracket may require header
panels to be pushed inwards or outwards slightly as
ridge beam is slid into place.
Attach roof support bracket (HH) to front and rear
headers. Secure with two screws (BB).
Repeat for remaining roof support.
BB
x2
19
1
T
Z